SL Power Electronics recommends a PCB layout with a solid ground plane and a minimum of 2 oz copper thickness to ensure optimal thermal performance. Additionally, keeping the components away from the power transformer and using thermal vias can help to reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it is recommended to derate the output power of the TF3000A250K according to the temperature derating curve provided in the datasheet. Additionally, ensuring good airflow and using a heatsink can help to reduce the operating temperature of the device.
SL Power Electronics recommends using a combination of X and Y capacitors, as well as a common-mode choke, to filter the input and output of the TF3000A250K. The specific component values and types will depend on the application and the desired level of electromagnetic interference (EMI) suppression.
The TF3000A250K has a built-in overcurrent protection feature that can be enabled by connecting a resistor between the OCP pin and the GND pin. The value of the resistor will determine the overcurrent threshold. Additionally, an external current sense resistor can be used to monitor the output current and trigger an overcurrent fault condition.
SL Power Electronics recommends a soft-start sequence to prevent inrush currents and reduce stress on the device. This can be achieved by slowly ramping up the input voltage or using a soft-start circuit to control the output voltage.
Findchips
Findchips