TL16C550CIFNRG4 datasheet by Texas Instruments

TL16C550CIFNRG4 Frequently Asked Questions (FAQs)

• What is the maximum baud rate supported by the TL16C550CIFNRG4?
  The TL16C550CIFNRG4 supports baud rates up to 3.125 Mbps.
• Can the TL16C550CIFNRG4 operate in 5V systems?
  Yes, the TL16C550CIFNRG4 is a 5V-tolerant device, but it is recommended to use it in 3.3V systems for optimal performance.
• How do I configure the TL16C550CIFNRG4 for 9-bit data transmission?
  To configure the TL16C550CIFNRG4 for 9-bit data transmission, set the MCR register to enable 9-bit mode, and then program the LCR register to select the 9-bit data length.
• What is the purpose of the FIFO buffers in the TL16C550CIFNRG4?
  The FIFO buffers in the TL16C550CIFNRG4 are used to store received data temporarily, allowing the processor to handle other tasks while the UART is receiving data, and reducing the likelihood of data loss.
• Can the TL16C550CIFNRG4 be used in half-duplex mode?
  Yes, the TL16C550CIFNRG4 can be used in half-duplex mode by using the RTS and CTS signals to control the flow of data transmission and reception.