The recommended operating voltage range for the TL5001ACD is 4.5V to 40V.
To ensure stability, use a minimum output capacitance of 10uF, and ensure the output voltage is within the recommended range. Also, use a low-ESR capacitor and keep the layout clean and compact.
The maximum output current of the TL5001ACD is 1A, but it can be limited by the input voltage, output voltage, and thermal considerations.
The output voltage of the TL5001ACD can be calculated using the formula: Vout = (R1/R2) * (Vin - Vref), where R1 and R2 are the feedback resistors, Vin is the input voltage, and Vref is the reference voltage (typically 2.5V).
The enable pin (EN) is used to turn the regulator on or off. When EN is high, the regulator is enabled, and when EN is low, the regulator is disabled and the output is turned off.
TL5001ACD datasheet
by Texas Instruments
