The maximum input voltage that can be applied to the TL750L05CDR is 15V, but it's recommended to keep it below 12V for optimal performance and to prevent damage to the device.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a minimum capacitance of 10uF and an ESR (Equivalent Series Resistance) of less than 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR of less than 1 ohm.
The minimum input voltage required for the TL750L05CDR to operate is 2.7V, but it's recommended to keep it above 3V for optimal performance.
The TL750L05CDR is rated for operation up to 125°C, but it's essential to ensure that the device is properly heat-sinked and that the ambient temperature is within the recommended range to prevent overheating and ensure reliable operation.
To protect the TL750L05CDR from input voltage transients, it's recommended to use a TVS (Transient Voltage Suppressor) diode or a voltage clamp circuit at the input to limit the voltage spikes and ensure the device operates within its recommended voltage range.
TL750L05CDR datasheet
by Texas Instruments
Findchips
