The maximum clock frequency for TLC0832CP is 3.5 MHz. However, it's recommended to use a clock frequency of 2.5 MHz or less to ensure reliable operation.
The TLC0832CP has a built-in POR circuit that resets the device when the power supply voltage (VCC) rises above 1.5V. To handle POR, ensure that the VCC ramp-up time is slower than 10 ms/V to prevent false triggering of the POR circuit.
The recommended operating voltage range for TLC0832CP is 4.5V to 5.5V. Operating the device outside this range may affect its performance and reliability.
TLC0832CP can be interfaced with a microcontroller using a 3-wire serial interface (CLK, DIN, and DOUT). The microcontroller should provide a clock signal to the CLK pin, and data should be sent to the DIN pin. The TLC0832CP will then output the converted data on the DOUT pin.
The conversion time of TLC0832CP is approximately 32 clock cycles. This means that the device takes around 32 clock cycles to complete a single conversion.
TLC0832CP datasheet
by Texas Instruments
Findchips
