The recommended power-up sequence is to apply VCC first, followed by AVCC, and then the analog input signals. This ensures proper internal biasing and prevents damage to the device.
To optimize for low power consumption, use the lowest possible clock frequency, disable the internal reference voltage, and use the power-down mode when not in use. Additionally, consider using a lower supply voltage (e.g., 3.3V instead of 5V) and optimizing the analog input signal levels.
The maximum clock frequency is 50 kHz, but it's recommended to use a clock frequency between 10 kHz and 40 kHz for optimal performance and to minimize noise and distortion.
Yes, the TLC320AC02CPM can be used with a single-ended analog input signal, but it's recommended to use a differential input signal to take advantage of the device's common-mode rejection capabilities and to improve noise immunity.
To ensure accurate conversion results, ensure that the analog input signal is within the specified range, use a stable clock signal, and provide a clean power supply. Additionally, consider using an external reference voltage and adjusting the internal gain settings to optimize the conversion results.
TLC320AC02CPM datasheet
by Texas Instruments
