TLC3702IDR datasheet by Texas Instruments

TLC3702IDR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for TLC3702IDR?
  The recommended operating voltage range for TLC3702IDR is 2.7V to 5.5V.
• How do I ensure the TLC3702IDR is properly powered on?
  To ensure proper power-on, the VCC pin should be ramped up slowly (typically within 1ms) to the desired operating voltage, and the VCC pin should be decoupled with a 0.1uF capacitor to GND.
• What is the maximum frequency of operation for TLC3702IDR?
  The maximum frequency of operation for TLC3702IDR is 100 kHz.
• How do I handle the output stage of TLC3702IDR?
  The output stage of TLC3702IDR is an open-drain configuration, so an external pull-up resistor is required to VCC or another voltage rail. The value of the pull-up resistor depends on the specific application and load requirements.
• What is the purpose of the EN pin on TLC3702IDR?
  The EN (Enable) pin is used to enable or disable the TLC3702IDR. When EN is low, the device is in shutdown mode and consumes minimal power. When EN is high, the device is enabled and operates normally.