Texas Instruments recommends a star-ground layout, with the amplifier's ground pin connected to a central ground point. Keep the input and output traces short and away from noise sources, and use a ground plane to reduce EMI.
Choose resistors with a tolerance of 1% or better, and ensure they are rated for the operating voltage and temperature range. For high-gain configurations, use resistors with low noise and low temperature coefficient.
The TLE2024IN can drive capacitive loads up to 1000 pF, but this may affect stability and bandwidth. Use a series resistor to dampen the load and ensure stability.
While the TLE2024IN can be used as a comparator, it is not recommended due to its limited output current and slew rate. Texas Instruments recommends using a dedicated comparator like the TLV7031 for comparator applications.
Use a voltage clamp or transient voltage suppressor (TVS) to protect the input pins from overvoltage. Add ESD protection diodes to the input pins, and ensure the PCB has adequate ESD protection measures.
TLE2024IN datasheet
by Texas Instruments
