The maximum power dissipation of TLV2374IDG4 is 670mW at 25°C free-air temperature, and it can be calculated using the formula: Pd = (VIN x IIN) + (VOUT x IOUT).
To minimize noise and ensure stability, it is recommended to follow good PCB layout practices such as separating analog and digital grounds, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, the input and output capacitors should be placed close to the device and connected to the correct pins.
The recommended input capacitor value is 1uF to 10uF, and the recommended output capacitor value is 1uF to 22uF. The capacitor type should be a low-ESR ceramic capacitor, such as X5R or X7R.
To ensure stability, the device requires a minimum output capacitance of 1uF, and the output capacitor should be connected to a low-impedance output. Additionally, the input voltage should be well-regulated and free of noise, and the device should be operated within its recommended operating conditions.
The maximum input voltage that can be applied to TLV2374IDG4 is 15V, and the device is not designed to operate with input voltages above this value.
TLV2374IDG4 datasheet
by Texas Instruments
