The recommended operating voltage range for the TMS2516-45JL is 4.5V to 5.5V, with a typical voltage of 5V.
The TMS2516-45JL has a thermal pad on the bottom of the package, which should be connected to a thermal ground plane or a heat sink to dissipate heat. Ensure good thermal conductivity and follow proper PCB design guidelines for thermal management.
The TMS2516-45JL supports a maximum clock frequency of 45 MHz, but it's recommended to operate at a lower frequency to ensure reliable operation and minimize power consumption.
To configure the TMS2516-45JL for low-power operation, use the IDLE mode, which reduces power consumption. You can also use the clock control registers to reduce the clock frequency or disable unused peripherals to minimize power consumption.
The VCC pin on the TMS2516-45JL is the power supply pin, which should be connected to a stable 5V power source. It's recommended to decouple the VCC pin with a 0.1uF capacitor to ensure noise reduction and stable operation.
