The recommended operating temperature range for the TMS2564-35JL is -40°C to 85°C.
The TMS2564-35JL has an internal POR circuit that resets the device during power-up. No external POR circuitry is required, but it's recommended to add a capacitor between VCC and GND to filter out noise and ensure a clean power-up sequence.
The TMS2564-35JL supports a maximum clock frequency of 35 MHz.
To configure the TMS2564-35JL for low-power operation, use the IDLE mode, which reduces power consumption. You can also use the clock control registers to reduce the clock frequency or disable unused peripherals to minimize power consumption.
The JTAG (Joint Test Action Group) interface on the TMS2564-35JL is used for debugging, testing, and programming the device. It allows for boundary scan, emulation, and flash programming.
