TPS2010AD datasheet by Texas Instruments

TPS2010AD Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS2010AD?
  The maximum input voltage that can be applied to the TPS2010AD is 12V, but it's recommended to keep it below 10V for reliable operation.
• How do I ensure the TPS2010AD switches between high and low states quickly?
  To ensure fast switching, make sure to use a low-ESR capacitor (less than 1 ohm) and keep the input voltage above 2.7V. Also, minimize the PCB trace inductance and use a low-inductance layout.
• What is the minimum input voltage required for the TPS2010AD to operate?
  The minimum input voltage required for the TPS2010AD to operate is 2.7V, but it's recommended to keep it above 3V for reliable operation.
• How do I reduce power consumption in standby mode?
  To reduce power consumption in standby mode, connect the EN pin to GND and ensure the input voltage is below 2.7V. This will put the device in shutdown mode, reducing the quiescent current to less than 1uA.
• What is the maximum current that the TPS2010AD can handle?
  The maximum current that the TPS2010AD can handle is 2A, but it's recommended to keep it below 1.5A for reliable operation and to prevent overheating.