TPS2063DR datasheet by Texas Instruments

TPS2063DR Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS2063DR?
  The maximum current rating of the TPS2063DR is 2A. However, it's recommended to limit the current to 1.5A for reliable operation.
• How do I ensure the TPS2063DR is properly powered on?
  To ensure the TPS2063DR is properly powered on, make sure the input voltage (VIN) is within the recommended range (2.7V to 5.5V), and the enable pin (EN) is high (logic level).
• What is the purpose of the power-good (PG) output?
  The power-good (PG) output is an open-drain output that indicates when the output voltage is within regulation. It can be used to monitor the output voltage and detect faults.
• How do I adjust the output voltage of the TPS2063DR?
  The output voltage of the TPS2063DR can be adjusted by connecting a resistor divider network between the output (VOUT) and the adjust pin (ADJ). The output voltage is determined by the ratio of the resistors.
• What is the thermal shutdown temperature of the TPS2063DR?
  The thermal shutdown temperature of the TPS2063DR is typically around 150°C. When the junction temperature exceeds this value, the device will shut down to prevent damage.