TPS2330IPW datasheet by Texas Instruments

TPS2330IPW Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS2330IPW?
  The maximum current rating of the TPS2330IPW is 2.5A per channel, with a total current limit of 5A for both channels combined.
• How do I ensure proper thermal management for the TPS2330IPW?
  To ensure proper thermal management, it is recommended to provide a heat sink or a thermal pad on the exposed pad of the device, and to keep the ambient temperature below 85°C.
• What is the purpose of the EN pin on the TPS2330IPW?
  The EN (enable) pin is used to enable or disable the device. When the EN pin is high, the device is enabled, and when it is low, the device is disabled.
• How do I configure the TPS2330IPW for dual-voltage operation?
  To configure the TPS2330IPW for dual-voltage operation, connect the VCC1 and VCC2 pins to the respective voltage sources, and ensure that the voltage on VCC1 is higher than the voltage on VCC2.
• What is the minimum input voltage required for the TPS2330IPW?
  The minimum input voltage required for the TPS2330IPW is 2.7V, but it is recommended to use a minimum input voltage of 3.3V for optimal performance.