TPS24700DGK datasheet by Texas Instruments

TPS24700DGK Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS24700DGK?
  The maximum current rating of the TPS24700DGK is 2A, but it can be limited by the thermal performance of the PCB and the ambient temperature.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 1ohm or less, and to place the capacitor close to the output pin of the device.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the device on and off. To use it, connect the EN pin to a logic-level signal (e.g. from a microcontroller) to enable or disable the device. When EN is high, the device is enabled, and when EN is low, the device is disabled.
• How do I adjust the output voltage of the TPS24700DGK?
  The output voltage of the TPS24700DGK can be adjusted by using a resistive divider network between the VOUT pin and the ADJ pin. The output voltage is determined by the ratio of the resistors in the divider network.
• What is the thermal shutdown temperature of the TPS24700DGK?
  The thermal shutdown temperature of the TPS24700DGK is typically 150°C, but it can vary depending on the specific device and operating conditions.