TPS2490DGSR datasheet by Texas Instruments

TPS2490DGSR Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS2490DGSR?
  The maximum current rating of the TPS2490DGSR is 2A, but it can be limited by the thermal performance of the PCB and the ambient temperature.
• How do I ensure the TPS2490DGSR is stable and doesn't oscillate?
  To ensure stability, follow the layout guidelines in the datasheet, use a low-ESR output capacitor, and add a 10nF-100nF ceramic capacitor between the VIN and GND pins.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the device on and off. Connect it to VIN to enable the device, or to GND to disable it. You can also use a logic signal to control the EN pin.
• How do I adjust the output voltage of the TPS2490DGSR?
  The output voltage can be adjusted by using a resistive divider network between the VOUT and ADJ pins. The ratio of the resistors determines the output voltage.
• What is the minimum input voltage required for the TPS2490DGSR?
  The minimum input voltage required for the TPS2490DGSR is 2.7V, but it's recommended to use a minimum of 3V to ensure proper operation.