TPS2513ADBVR datasheet by Texas Instruments

TPS2513ADBVR Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS2513ADBVR?
  The maximum current rating of the TPS2513ADBVR is 1.5A per channel, with a total current limit of 3A for both channels.
• How do I configure the TPS2513ADBVR for USB-C Power Delivery (PD) applications?
  To configure the TPS2513ADBVR for USB-C PD applications, connect the CC1 and CC2 pins to the CC lines of the USB-C connector, and use the I2C interface to configure the device for PD mode. Refer to the datasheet and application notes for specific configuration details.
• What is the purpose of the EN pin on the TPS2513ADBVR?
  The EN (enable) pin is used to enable or disable the device. When the EN pin is high, the device is enabled and operates normally. When the EN pin is low, the device is disabled and all outputs are turned off.
• How does the TPS2513ADBVR handle fault conditions such as overcurrent or overheating?
  The TPS2513ADBVR has built-in fault detection and protection mechanisms. In the event of an overcurrent or overheating condition, the device will automatically shut down to prevent damage. The device will also report the fault condition through the FAULT pin and the I2C interface.
• Can the TPS2513ADBVR be used in applications other than USB-C and Power Delivery?
  Yes, the TPS2513ADBVR is a general-purpose power switch with I2C control, and can be used in a variety of applications beyond USB-C and Power Delivery, such as battery charging, power management, and general-purpose switching.