TPS2592AADRCR datasheet by Texas Instruments

TPS2592AADRCR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the TPS2592AADRCR can handle?
  The TPS2592AADRCR can handle input voltages up to 28V, but it's recommended to keep the input voltage below 24V for optimal performance and reliability.
• How do I choose the right output capacitor for the TPS2592AADRCR?
  The output capacitor should be chosen based on the output voltage and current requirements. A general rule of thumb is to use a capacitor with a value between 10uF to 22uF, and a voltage rating of at least 2x the output voltage. For example, for a 5V output, use a 10uF to 22uF capacitor with a voltage rating of at least 10V.
• What is the purpose of the EN pin on the TPS2592AADRCR?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled and output voltage is present. When the EN pin is low, the regulator is disabled and the output voltage is turned off.
• How do I calculate the output voltage of the TPS2592AADRCR?
  The output voltage of the TPS2592AADRCR is set using the FB (feedback) pin and the resistors R1 and R2. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2.
• What is the maximum output current of the TPS2592AADRCR?
  The maximum output current of the TPS2592AADRCR is 2A. However, the output current should be derated based on the input voltage and ambient temperature to ensure reliable operation.