TPS2816DBVT datasheet by Texas Instruments

TPS2816DBVT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS2816DBVT?
  The maximum input voltage that can be applied to the TPS2816DBVT is 18V, although the recommended operating range is 4.5V to 15V.
• How do I ensure the TPS2816DBVT is properly powered up and down?
  To ensure proper power-up and power-down, make sure to follow the recommended power-up sequence: EN (enable) pin high, then VIN (input voltage) applied, and finally VOUT (output voltage) stable. For power-down, reverse the sequence.
• What is the purpose of the EN (enable) pin, and how do I use it?
  The EN pin is an active-high enable input that allows the device to be turned on or off. When EN is high, the device is enabled, and when EN is low, the device is disabled and enters a low-power shutdown state.
• How do I calculate the output voltage of the TPS2816DBVT?
  The output voltage (VOUT) can be calculated using the formula: VOUT = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB (feedback) pin.
• What is the minimum and maximum output current capability of the TPS2816DBVT?
  The TPS2816DBVT can deliver a minimum output current of 0A and a maximum output current of 1.5A, although the recommended operating range is up to 1A for optimal performance.