A good PCB layout for the TPS40003DGQR involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to use a separate power plane for the input voltage and to keep the noise-sensitive analog traces away from the switching node.
The choice of input and output capacitors for the TPS40003DGQR depends on the specific application requirements. In general, low-ESR ceramic capacitors with a voltage rating of at least 2x the input voltage are recommended. The output capacitor should be chosen based on the desired output ripple and load transient response.
The TPS40003DGQR is rated for operation from -40°C to 125°C, but the maximum ambient temperature range depends on the specific application and the device's power dissipation. It's recommended to derate the device's power dissipation based on the ambient temperature to ensure reliable operation.
The TPS40003DGQR has a SYNC pin that can be used to synchronize the switching frequency of multiple devices. The SYNC pin can be connected to an external clock source or to the SYNC pin of another TPS40003DGQR device. The devices will then synchronize their switching frequencies to the external clock source or to each other.
The recommended input voltage range for the TPS40003DGQR is 2.7V to 5.5V, but the device can operate from 2.5V to 6V. However, the device's performance and efficiency may be affected at input voltages outside the recommended range.
TPS40003DGQR datasheet
by Texas Instruments
Findchips
