TPS54160ADGQR datasheet by Texas Instruments

TPS54160ADGQR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54160ADGQR?
  The maximum input voltage that can be applied to the TPS54160ADGQR is 60V, but it's recommended to operate within the specified input voltage range of 4.5V to 60V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines provided in the datasheet, including the use of a suitable output capacitor and a low-ESR input capacitor.
• What is the maximum output current that the TPS54160ADGQR can deliver?
  The maximum output current that the TPS54160ADGQR can deliver is 1.5A, but it's recommended to operate within the specified output current range of 0.5A to 1.5A for optimal performance and reliability.
• How do I adjust the output voltage of the TPS54160ADGQR?
  The output voltage of the TPS54160ADGQR can be adjusted by using an external resistor divider network connected to the FB pin, as described in the datasheet.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to enable or disable the regulator. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.