The maximum input voltage that can be applied to the TPS54160DGQRG4 is 60V, but it's recommended to operate within the specified input voltage range of 4.5V to 40V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to follow the recommended layout guidelines, use a suitable output capacitor, and ensure that the input voltage is within the specified range. Additionally, the output voltage can be adjusted using the feedback resistors, and the output capacitor should be placed close to the output pin to minimize noise and oscillations.
The maximum output current that the TPS54160DGQRG4 can deliver is 1.5A, but it's recommended to operate within the specified output current range of 0.5A to 1.5A for optimal performance and reliability.
To protect the TPS54160DGQRG4 from overheating, ensure that the device is operated within the specified temperature range of -40°C to 125°C, and provide adequate heat sinking and airflow. Additionally, the device should be mounted on a suitable PCB with thermal vias to dissipate heat efficiently.
The enable pin (EN) on the TPS54160DGQRG4 is used to enable or disable the device. When the EN pin is pulled high, the device is enabled, and when it's pulled low, the device is disabled. This pin can be used to implement power sequencing or to turn off the device when not in use.
TPS54160DGQRG4 datasheet
by Texas Instruments
Findchips
