TPS54360BQDDARQ1 datasheet by Texas Instruments

TPS54360BQDDARQ1 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54360BQDDARQ1?
  The maximum input voltage that can be applied to the TPS54360BQDDARQ1 is 42V, but it's recommended to keep it below 40V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines provided in the datasheet, including the use of a suitable output capacitor and a low-ESR input capacitor.
• What is the minimum input capacitance required for the TPS54360BQDDARQ1?
  The minimum input capacitance required for the TPS54360BQDDARQ1 is 10uF, but it's recommended to use a higher value (e.g., 22uF) to ensure stable operation and minimize input voltage ripple.
• Can I use the TPS54360BQDDARQ1 in a high-temperature environment?
  The TPS54360BQDDARQ1 is rated for operation up to 125°C, but it's essential to consider the thermal design and ensure that the device is properly cooled to prevent overheating and ensure reliable operation.
• How do I adjust the output voltage of the TPS54360BQDDARQ1?
  The output voltage of the TPS54360BQDDARQ1 can be adjusted by using a resistor divider network between the VOUT pin and the GND pin, as described in the datasheet.