Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img TPS54613PWPR datasheet by Texas Instruments

    • 3 V to 6 V Input, 6 A Output Synchronous Buck PWM Switcher with Integrated FETs (SWIFT)
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    TPS54613PWPR datasheet preview

    TPS54613PWPR Frequently Asked Questions (FAQs)

    • The maximum input voltage that can be applied to the TPS54613PWPR is 17V, but it's recommended to keep it below 15V for optimal performance and reliability.
    • To ensure stability, make sure to follow the recommended layout and component selection guidelines in the datasheet, and add a 10uF ceramic capacitor between the VIN and GND pins. Additionally, use a low-ESR output capacitor and keep the output voltage ripple below 1%.
    • The minimum input capacitance required is 10uF, but it's recommended to use a 22uF or larger ceramic capacitor to ensure stability and optimal performance.
    • The TPS54613PWPR is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage as the temperature increases to ensure reliability and prevent overheating.
    • To synchronize the switching frequency, connect the SYNC pin of each device to a common clock signal, and ensure that the clock frequency is within the recommended range of 300kHz to 1.4MHz.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel