TPS54615PWP datasheet by Texas Instruments

TPS54615PWP Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54615PWP?
  The maximum input voltage that can be applied to the TPS54615PWP is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, ensure that the input voltage is within the recommended range and the output current is within the specified limit.
• What is the maximum output current that the TPS54615PWP can deliver?
  The maximum output current that the TPS54615PWP can deliver is 1.5A, but it's recommended to keep it below 1.2A for optimal performance and reliability.
• How do I adjust the output voltage of the TPS54615PWP?
  The output voltage of the TPS54615PWP can be adjusted by using a resistor divider network between the VOUT pin and the GND pin. The output voltage can be calculated using the formula: VOUT = 0.8V x (R1 + R2) / R2.
• What is the purpose of the EN pin on the TPS54615PWP?
  The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled. This pin can be used to turn the regulator on and off as needed.