TPS54616PWP datasheet by Texas Instruments

TPS54616PWP Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54616PWP?
  The maximum input voltage that can be applied to the TPS54616PWP is 6.5V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage in the TPS54616PWP?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 10mΩ or less, and to place the output capacitor close to the output pin of the device.
• What is the maximum output current that the TPS54616PWP can deliver?
  The maximum output current that the TPS54616PWP can deliver is 1.5A. Exceeding this current may cause the device to overheat or shut down.
• How do I adjust the output voltage of the TPS54616PWP?
  The output voltage of the TPS54616PWP can be adjusted by using a resistor divider network between the output pin and the feedback pin. The output voltage can be calculated using the formula: Vout = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
• What is the purpose of the EN pin on the TPS54616PWP?
  The EN (enable) pin on the TPS54616PWP is used to enable or disable the device. When the EN pin is pulled high, the device is enabled and the output voltage is regulated. When the EN pin is pulled low, the device is disabled and the output voltage is turned off.