TPS54672PWPR datasheet by Texas Instruments

TPS54672PWPR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54672PWPR?
  The maximum input voltage that can be applied to the TPS54672PWPR is 6.5V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 1ohm or less, and to place the capacitor as close to the output pin as possible.
• What is the maximum output current that the TPS54672PWPR can deliver?
  The maximum output current that the TPS54672PWPR can deliver is 2A. Exceeding this current may cause the device to overheat or shut down.
• How do I adjust the output voltage of the TPS54672PWPR?
  The output voltage of the TPS54672PWPR can be adjusted by using a resistor divider network between the output pin and the feedback pin. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2.
• What is the purpose of the EN pin on the TPS54672PWPR?
  The EN (enable) pin is used to turn the device on or off. When the EN pin is pulled high, the device is enabled and the output voltage is regulated. When the EN pin is pulled low, the device is disabled and the output voltage is disconnected.