A good PCB layout for the TPS61016DGS involves placing the input and output capacitors close to the device, using a solid ground plane, and keeping the high-current paths short and wide. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
Choose input capacitors with a voltage rating higher than the maximum input voltage, and output capacitors with a voltage rating higher than the output voltage. X5R or X7R ceramic capacitors are recommended for their low ESR and high ripple current capability.
The TPS61016DGS can operate in an ambient temperature range of -40°C to 125°C. However, the device's junction temperature should not exceed 150°C.
The output voltage of the TPS61016DGS can be calculated using the formula: VOUT = VREF x (1 + R1/R2), where VREF is the internal reference voltage (1.21V), and R1 and R2 are the feedback resistors.
The maximum input voltage for the TPS61016DGS is 18V. Exceeding this voltage may damage the device.
TPS61016DGS datasheet
by Texas Instruments
