TPS61024DRCR datasheet by Texas Instruments

TPS61024DRCR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS61024DRCR?
  The maximum input voltage that can be applied to the TPS61024DRCR is 12V, but it's recommended to keep it below 10V for optimal performance and to prevent damage to the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low equivalent series resistance (ESR) and a sufficient capacitance value. A minimum capacitance of 10uF is recommended, and the capacitor should be placed as close to the output pin as possible.
• What is the minimum input capacitance required for the TPS61024DRCR?
  The minimum input capacitance required for the TPS61024DRCR is 1uF, but it's recommended to use a higher capacitance value (e.g., 4.7uF) to ensure stable operation and to filter out noise and ripple.
• Can I use the TPS61024DRCR in a high-temperature environment?
  The TPS61024DRCR is rated for operation up to 85°C, but it's essential to consider the device's power dissipation and thermal management when operating in high-temperature environments. Ensure that the device is properly heat-sinked and that the ambient temperature is within the specified range.
• How do I calculate the output voltage of the TPS61024DRCR?
  The output voltage of the TPS61024DRCR can be calculated using the following formula: VOUT = VREF x (1 + R1/R2), where VREF is the internal reference voltage (1.21V), and R1 and R2 are the resistors connected to the FB pin.