The maximum input voltage that can be applied to the TPS61030PWPRG4 is 12V, but it's recommended to keep it below 10V for optimal performance and to prevent damage to the device.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a sufficient capacitance value. A 10uF to 22uF ceramic capacitor is recommended. Additionally, the input capacitor should be placed close to the VIN pin to reduce noise and improve stability.
The minimum input voltage required for the TPS61030PWPRG4 to operate is 2.5V. However, the device can operate down to 2.3V with a reduced output voltage and efficiency.
The TPS61030PWPRG4 is rated for operation up to 125°C, but it's essential to consider the thermal design and ensure that the device is properly cooled to prevent overheating. A thermal pad is available on the package to help with heat dissipation.
The output voltage of the TPS61030PWPRG4 can be calculated using the following formula: VOUT = 0.6V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin. The output voltage range is from 1.2V to 5.5V.
TPS61030PWPRG4 datasheet
by Texas Instruments
