TPS61030RSARG4 datasheet by Texas Instruments

TPS61030RSARG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS61030?
  The maximum input voltage that can be applied to the TPS61030 is 12V, but it's recommended to keep it below 10V for optimal performance and to prevent damage to the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low equivalent series resistance (ESR) and a sufficient capacitance value. A minimum capacitance value of 10uF is recommended.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the device on or off. To turn the device on, connect the EN pin to VIN or a logic high signal. To turn the device off, connect the EN pin to GND or a logic low signal.
• How do I calculate the output voltage of the TPS61030?
  The output voltage of the TPS61030 can be calculated using the following formula: VOUT = 1.2V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB (feedback) pin.
• What is the maximum output current that the TPS61030 can provide?
  The maximum output current that the TPS61030 can provide is 300mA. However, the actual output current may be limited by the input voltage, output voltage, and the internal resistance of the device.