TPS61161QDRVRQ1 datasheet by Texas Instruments

TPS61161QDRVRQ1 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS61161QDRVRQ1?
  The maximum input voltage that can be applied to the TPS61161QDRVRQ1 is 18V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage in the TPS61161QDRVRQ1?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 100mΩ or less, and to place the capacitor close to the output pin.
• What is the maximum output current that the TPS61161QDRVRQ1 can deliver?
  The maximum output current that the TPS61161QDRVRQ1 can deliver is 1.5A. Exceeding this current may cause the device to overheat or shut down.
• How do I configure the TPS61161QDRVRQ1 for a specific output voltage?
  The output voltage of the TPS61161QDRVRQ1 can be configured by connecting a resistor divider network between the output pin and the ground pin. The ratio of the resistors determines the output voltage.
• What is the purpose of the EN pin on the TPS61161QDRVRQ1?
  The EN (enable) pin is used to turn the device on or off. When the EN pin is high, the device is enabled and the output voltage is regulated. When the EN pin is low, the device is disabled and the output voltage is disconnected.