TPS61163AYFFR datasheet by Texas Instruments

TPS61163AYFFR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS61163AYFFR?
  The maximum input voltage that can be applied to the TPS61163AYFFR is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, make sure to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a sufficient capacitance value, as recommended in the datasheet.
• What is the minimum input capacitance required for the TPS61163AYFFR?
  The minimum input capacitance required for the TPS61163AYFFR is 10uF, but it's recommended to use a higher value (e.g., 22uF) for better performance and stability.
• Can I use the TPS61163AYFFR in a high-temperature environment?
  The TPS61163AYFFR is rated for operation up to 125°C, but its performance and reliability may degrade at high temperatures. It's recommended to use a heat sink or thermal management techniques to keep the device temperature below 100°C.
• How do I calculate the output voltage of the TPS61163AYFFR?
  The output voltage of the TPS61163AYFFR can be calculated using the formula: Vout = (R1 / R2) * (Vfb - Vref), where R1 and R2 are the feedback resistors, Vfb is the feedback voltage, and Vref is the reference voltage.