TPS62110MRSAREP datasheet by Texas Instruments

TPS62110MRSAREP Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS62110MRSAREP?
  The maximum input voltage that can be applied to the TPS62110MRSAREP is 18V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and an ESR of 100mΩ or less. Additionally, the output voltage can be stabilized by adding a 10nF capacitor between the VOUT and GND pins.
• What is the maximum output current that the TPS62110MRSAREP can deliver?
  The maximum output current that the TPS62110MRSAREP can deliver is 1A. However, the output current may be limited by the input voltage, output voltage, and thermal considerations.
• How do I calculate the power dissipation of the TPS62110MRSAREP?
  The power dissipation of the TPS62110MRSAREP can be calculated using the formula: Pd = (Vin - Vout) x Iout. Where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
• What is the purpose of the EN pin on the TPS62110MRSAREP?
  The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it is low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.