TPS62263DRVT datasheet by Texas Instruments

TPS62263DRVT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS62263DRVT?
  The maximum input voltage that can be applied to the TPS62263DRVT is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage in my design?
  To ensure stability, make sure to follow the recommended layout guidelines, use a sufficient output capacitor (at least 10uF), and keep the input capacitor (if used) as close to the VIN pin as possible.
• What is the minimum input voltage required for the TPS62263DRVT to operate?
  The minimum input voltage required for the TPS62263DRVT to operate is 2.5V, but it's recommended to keep it above 3V for optimal performance.
• Can I use the TPS62263DRVT in a high-temperature environment?
  Yes, the TPS62263DRVT is rated for operation up to 125°C, but make sure to follow the recommended derating guidelines for output current and input voltage to ensure reliability.
• How do I calculate the output voltage of the TPS62263DRVT?
  The output voltage of the TPS62263DRVT can be calculated using the formula: VOUT = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin.