TPS62293DRVR datasheet by Texas Instruments

TPS62293DRVR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS62293DRVR?
  The maximum input voltage that can be applied to the TPS62293DRVR is 18V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage in the TPS62293DRVR?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the output voltage should be decoupled with a 1uF ceramic capacitor.
• What is the maximum output current that the TPS62293DRVR can deliver?
  The maximum output current that the TPS62293DRVR can deliver is 3A. However, the output current should be derated based on the input voltage and ambient temperature.
• How do I configure the TPS62293DRVR for a specific output voltage?
  The output voltage of the TPS62293DRVR can be configured by connecting a resistor divider network between the output and the FB pin. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2.
• What is the purpose of the EN pin on the TPS62293DRVR?
  The EN (enable) pin is used to enable or disable the device. When the EN pin is pulled high, the device is enabled and the output voltage is regulated. When the EN pin is pulled low, the device is disabled and the output voltage is turned off.