The maximum input voltage that can be applied to the TPS62302DRCR is 17V, but it's recommended to keep it below 15V for optimal performance and reliability.
To ensure the stability of the output voltage, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, ensure that the input capacitance is at least 10uF and the input voltage is within the recommended range.
The maximum output current that the TPS62302DRCR can deliver is 2A, but it's recommended to keep it below 1.5A for optimal performance and reliability.
The output voltage can be configured by connecting a resistor divider network between the output pin and the ground pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
The EN (enable) pin is used to enable or disable the device. When the EN pin is high, the device is enabled, and when it's low, the device is disabled. This pin can be used to implement power sequencing or to turn off the device when not in use.
TPS62302DRCR datasheet
by Texas Instruments
