TPS71713DCKT datasheet by Texas Instruments

TPS71713DCKT Frequently Asked Questions (FAQs)

• What is the recommended input capacitor value for the TPS71713DCKT?
  The recommended input capacitor value is 1uF to 10uF, with a voltage rating of at least 6.3V. A larger capacitor can help reduce input ripple and improve noise rejection.
• How do I ensure stability and prevent oscillations in the TPS71713DCKT?
  To ensure stability, use a minimum output capacitor of 2.2uF with an ESR of 0.1Ω to 10Ω. Additionally, place the output capacitor close to the output pin and use a low-ESR capacitor to minimize ringing and oscillations.
• What is the maximum output current capability of the TPS71713DCKT?
  The TPS71713DCKT can deliver up to 1.5A of output current. However, the maximum output current is dependent on the input voltage, output voltage, and ambient temperature. Refer to the datasheet's thermal derating curves for more information.
• Can I use the TPS71713DCKT in a high-temperature environment?
  The TPS71713DCKT is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Ensure proper thermal design and consider derating the output current to prevent overheating.
• How do I configure the enable pin (EN) of the TPS71713DCKT?
  The enable pin (EN) is active-high. Connect it to a logic high (VIN or a voltage above 1.4V) to enable the regulator. Connect it to a logic low (GND or a voltage below 0.4V) to disable the regulator.