The maximum input voltage that can be applied to the TPS72015DRVT is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
To ensure stability and prevent oscillations, it's essential to follow the recommended layout and component selection guidelines, including the use of a suitable output capacitor and a low-ESR input capacitor. Additionally, the input voltage should be well-regulated and free of noise.
The minimum input voltage required for the TPS72015DRVT to operate is 2.7V, but it's recommended to keep it above 3V for optimal performance and to ensure that the output voltage remains within the specified tolerance.
The TPS72015DRVT is rated for operation up to 125°C, but it's essential to ensure that the device is properly heatsinked and that the junction temperature is kept below the maximum rating to prevent thermal shutdown and ensure reliability.
The output voltage of the TPS72015DRVT can be calculated using the formula: Vout = 1.5V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin. The output voltage can be adjusted by selecting the appropriate values for R1 and R2.
TPS72015DRVT datasheet
by Texas Instruments
