TPS7233QD datasheet by Texas Instruments

TPS7233QD Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS7233QD?
  The maximum input voltage that can be applied to the TPS7233QD is 6V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in my design?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to place the capacitor as close to the output pin as possible. Additionally, the input capacitor should be at least 1uF.
• What is the maximum output current that the TPS7233QD can provide?
  The maximum output current that the TPS7233QD can provide is 150mA. Exceeding this current may cause the device to overheat or malfunction.
• How do I calculate the output voltage of the TPS7233QD?
  The output voltage of the TPS7233QD can be calculated using the formula: Vout = (R1 / R2) x Vref, where R1 and R2 are the resistors connected to the FB pin, and Vref is the internal reference voltage (1.2V).
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it is low, the regulator is disabled. This pin can be used to implement power-saving features in your design.