TPS73101MDBVREP datasheet by Texas Instruments

TPS73101MDBVREP Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS73101MDBVREP?
  The maximum input voltage that can be applied to the TPS73101MDBVREP is 13.2V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in the TPS73101MDBVREP?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 1 ohm or less, as specified in the datasheet. Additionally, the input capacitance should be at least 1uF with an ESR of 1 ohm or less.
• What is the maximum output current that the TPS73101MDBVREP can deliver?
  The maximum output current that the TPS73101MDBVREP can deliver is 150mA, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I calculate the output voltage of the TPS73101MDBVREP?
  The output voltage of the TPS73101MDBVREP can be calculated using the formula: Vout = 1.2V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin. The output voltage range is from 1.2V to 5.5V.
• What is the purpose of the EN pin on the TPS73101MDBVREP?
  The EN (enable) pin on the TPS73101MDBVREP is used to enable or disable the device. When the EN pin is high, the device is enabled and the output voltage is regulated. When the EN pin is low, the device is disabled and the output voltage is turned off.