The maximum input voltage that can be applied to the TPS73618DBVTG4 is 15V, but it's recommended to keep it below 12V for optimal performance and to prevent damage to the device.
To ensure stability of the output voltage, it's recommended to use a minimum output capacitance of 10uF, and to keep the output voltage within the specified range of 1.2V to 5.5V. Additionally, the input voltage should be well-regulated and free of noise.
The maximum output current that the TPS73618DBVTG4 can deliver is 1.5A, but it's recommended to keep it below 1A for optimal performance and to prevent overheating.
The TPS73618DBVTG4 has a fixed output voltage of 1.8V, but it can be adjusted using an external resistor divider network connected to the FB pin. The output voltage can be calculated using the formula: Vout = 1.2V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
The power dissipation of the TPS73618DBVTG4 depends on the input voltage, output voltage, and output current. The maximum power dissipation is approximately 1.5W, but it's recommended to keep it below 1W for optimal performance and to prevent overheating.
TPS73618DBVTG4 datasheet
by Texas Instruments
