TPS73633DBVTG4 datasheet by Texas Instruments

TPS73633DBVTG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS73633DBVTG4?
  The maximum input voltage is 15V, but it's recommended to keep it below 13.2V for optimal performance and to prevent overheating.
• How do I ensure the stability of the output voltage?
  To ensure stability, a minimum output capacitance of 10uF is recommended, and the ESR (Equivalent Series Resistance) should be less than 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR less than 1 ohm.
• What is the maximum output current I can draw from the TPS73633DBVTG4?
  The maximum output current is 1A, but it's recommended to keep it below 0.8A for optimal performance and to prevent overheating.
• How do I adjust the output voltage?
  The output voltage can be adjusted by connecting a resistor divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage (1.205V).
• What is the purpose of the EN pin?
  The EN (Enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.