TPS74201KTWRG3 datasheet by Texas Instruments

TPS74201KTWRG3 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS74201KTWRG3?
  The maximum input voltage that can be applied to the TPS74201KTWRG3 is 5.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage in the TPS74201KTWRG3?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum equivalent series resistance (ESR) of 1 ohm, as specified in the datasheet.
• What is the maximum output current that the TPS74201KTWRG3 can deliver?
  The maximum output current that the TPS74201KTWRG3 can deliver is 1A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I calculate the output voltage of the TPS74201KTWRG3?
  The output voltage of the TPS74201KTWRG3 can be calculated using the formula: Vout = (R1 / R2) * (Vin - Vref), where R1 and R2 are the resistors used in the feedback network, Vin is the input voltage, and Vref is the reference voltage (typically 1.2V).
• What is the purpose of the EN pin on the TPS74201KTWRG3?
  The EN (enable) pin on the TPS74201KTWRG3 is used to enable or disable the output voltage. When the EN pin is high, the output voltage is enabled, and when it is low, the output voltage is disabled.