TPS77525MPWPREP datasheet by Texas Instruments

TPS77525MPWPREP Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS77525MPWPREP?
  The maximum input voltage that can be applied to the TPS77525MPWPREP is 15V, but it's recommended to keep it below 13.2V to ensure reliable operation.
• How do I ensure the stability of the output voltage in the TPS77525MPWPREP?
  To ensure the stability of the output voltage, it's recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitance should be at least 1uF.
• What is the maximum output current that the TPS77525MPWPREP can deliver?
  The maximum output current that the TPS77525MPWPREP can deliver is 500mA. However, it's recommended to keep the output current below 400mA to ensure reliable operation and to prevent overheating.
• How do I configure the enable pin (EN) of the TPS77525MPWPREP?
  The enable pin (EN) is an active-high input that can be connected to a logic signal or a voltage source. To enable the device, the EN pin should be pulled high to a voltage above 1.4V. To disable the device, the EN pin should be pulled low to a voltage below 0.4V.
• What is the thermal shutdown temperature of the TPS77525MPWPREP?
  The thermal shutdown temperature of the TPS77525MPWPREP is typically around 150°C. When the junction temperature exceeds this value, the device will shut down to prevent damage.