The recommended operating voltage range for the TS2431AILT is 2.7V to 5.5V.
To ensure proper power-on, the TS2431AILT requires a stable power supply, a decoupling capacitor between VCC and GND, and a pull-up resistor on the EN pin.
The maximum data transfer rate of the TS2431AILT is 100 Mbps.
The TS2431AILT can be configured for half-duplex or full-duplex operation by setting the HDX pin high or low, respectively.
The RXD pin is the receive data input, and the TXD pin is the transmit data output.
TS2431AILT datasheet
by STMicroelectronics
