TS272ACDT datasheet by STMicroelectronics

TS272ACDT Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TS272ACDT?
  The recommended operating voltage range for the TS272ACDT is 2.7V to 5.5V, although it can tolerate a voltage range of 2.3V to 6V for short periods.
• How do I ensure the TS272ACDT is properly biased for optimal performance?
  To ensure proper biasing, connect the VCC pin to a stable voltage source, and decouple it with a 10nF to 100nF capacitor to ground. Also, ensure the input voltage (VIN) is within the recommended range and the output voltage (VOUT) is properly terminated.
• What is the maximum output current the TS272ACDT can deliver?
  The TS272ACDT can deliver a maximum output current of 250mA, although this may vary depending on the input voltage, output voltage, and ambient temperature.
• How do I handle thermal considerations for the TS272ACDT?
  To handle thermal considerations, ensure good thermal conduction between the device and the PCB, and avoid exposing the device to high temperatures (above 125°C) for extended periods. Also, consider using a heat sink or thermal pad if the device is expected to operate at high temperatures or with high power dissipation.
• What is the typical propagation delay for the TS272ACDT?
  The typical propagation delay for the TS272ACDT is around 10ns to 20ns, although this may vary depending on the input signal frequency, output load, and operating conditions.