The maximum power dissipation of the TSV358IPT is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (RthJA) of 125°C/W.
To ensure stability, it's recommended to use a gain resistor (RG) between 1kΩ and 10kΩ, and a feedback capacitor (CF) between 10pF and 100pF, depending on the specific application and desired bandwidth.
To minimize noise and EMI, it's recommended to use a star-ground configuration, keep the input and output traces short and symmetrical, and use a ground plane to shield the device. Additionally, decoupling capacitors should be placed close to the device pins.
Yes, the TSV358IPT can be used in a single-supply configuration, but it's recommended to use a voltage divider to set the input common-mode voltage to half of the supply voltage to ensure optimal performance.
The TSV358IPT can drive a maximum capacitive load of 100pF, but it's recommended to limit the capacitive load to 10pF to 20pF to ensure stability and optimal performance.
TSV358IPT datasheet
by STMicroelectronics
