TXB0102DCUT datasheet by Texas Instruments

TXB0102DCUT Frequently Asked Questions (FAQs)

• What is the maximum data rate that the TXB0102DCUT can support?
  The TXB0102DCUT can support data rates up to 100 Mbps.
• Can the TXB0102DCUT be used in a voltage translation application where the input voltage is higher than the output voltage?
  Yes, the TXB0102DCUT can be used in a voltage translation application where the input voltage is higher than the output voltage, but the output voltage should not exceed the maximum rating of 3.6V.
• How do I ensure that the TXB0102DCUT is properly powered and biased?
  To ensure proper operation, the TXB0102DCUT should be powered with a stable voltage source, and the VCC pin should be decoupled with a 0.1uF capacitor to ground. Additionally, the device should be biased with a pull-up resistor on the output pins.
• What is the maximum capacitive load that the TXB0102DCUT can drive?
  The TXB0102DCUT can drive capacitive loads up to 100 pF.
• Can the TXB0102DCUT be used in a bidirectional voltage translation application?
  Yes, the TXB0102DCUT can be used in a bidirectional voltage translation application, but it requires an external direction control signal to switch between the input and output directions.