The recommended termination resistance is 1 kΩ to ensure proper signal integrity and minimize reflections.
While the VCS25AXT-128 is rated for industrial temperature range (-40°C to 85°C), it's essential to consider the specific application and ensure the oscillator is properly derated for high-temperature operation. Consult with Fox Electronics or a qualified engineer for guidance.
Use a 0.01 μF to 0.1 μF ceramic capacitor in parallel with a 10 μF to 22 μF electrolytic capacitor to decouple the power supply. Place the capacitors as close to the oscillator as possible to minimize noise and ensure stable operation.
The typical start-up time for the VCS25AXT-128 is around 5 ms to 10 ms. However, this can vary depending on the specific application, power supply, and environmental conditions.
Yes, the VCS25AXT-128 is designed to meet EMI requirements. However, it's essential to follow proper PCB layout and design guidelines, such as using a ground plane, minimizing trace lengths, and using shielding if necessary, to ensure low EMI emissions.
